STANDARD CONNECTION ABUTMENT TYPES
DENTI® CEMENTED ABUTMENT TYPES
CYLINDRICAL ABUTMENT FOR ANGLED CORRECTION
The cylindrical abutment is recommended whenever there is a need to correct axial deviations in case any implants are not adequately parallel with each other. It can be used for the preparation of both individual crowns and bridge and can be corrected by means of milling whenever necessary.
DENTI® SCREW RETAINED ABUTMENT TYPE
INTERMEDIARY ABUTMENTS
Denti® intermediary abutments are especially useful when treating tight edentulous gaps. Reshaping of the crowns and bridges can be carried out by prefabricated burnout plastic cylinder.
GINGIVA FORMERS
GINGIVA FORMERS
The gingiva formers are designed to use for the formation of a new peri-implant gingival cuff. Denti® gingiva formers are designed with three heights. The appropriate one to choose is the one, which is approx. 1 mm longer than the mucoperiosteum. Thus when tightened, it will protrude into the mouth. In case of implants assembled by a two-stage surgery method, we recommend the use of Denti® gingiva formers for the healing period after the second operation.
TEMPORARY/SCANABLE ABUTMENT
TEMPORARY/SCANNABLE ABUTMENT
Due to the material of the temporary abutment (WHITE PEEK), it can be applied in dental scanners. For the construction of immediate, temporary prostheses, we recommend the use of temporary head parts made of hard plastic (PEEK). The head part is secured into the implant with a through bolt. After securing the head part, it may be grinded in, as necessary, with a turbine in the mouth, and the impression for the temporary immediate prosthesis can be taken immediately. The completed crown/bridge is fixed to the head parts with adhesive cement.
Immediate head part is not recommended for long-term loading.
