+36 30 229 8798 [email protected]

DENTI BONE LEVEL INSTRUMENTS

PROFESSIONAL SURGICAL SET

The surgical instrument trays can be used for the storage and sterilization of the instruments that belong to the implants of each system.
The surgical trays are made up of the following components: basic tray, holder, cover, colored rings, which may be exchanged when damaged.

SIZE OF THE Professional SURGICAL TRAY:

199 mm x 174 mm x 60 mm.

ECO SURGICAL SET

SIZE OF THE ECO SURGICAL TRAY:

176 mm x 143 mm x 63,5 mm.

SURGICAL INSTRUMENTS

The special surgical kit was developed for the insertion of Denti® Bone Level implants. Drills and bone cutters with a cutting edge used for cutting the living bone are made of stainless steel meeting international standards. The instruments are designed to ensure atraumatic preparation. High primary stability is guaranteed for every quality bone.

THE DRILLS ARE:

  • made from surgical stainless steel
  • color coded on the shaft for quick identification
  • numerically coded on the shaft
  • laser marked for marking depths and diameters
  • autoclavable
  • available in a complete kit or as individual items
  • for external irrigation
  • double possibility: using with contra-angle or manually

TWO-IN-ONES

The Denti® two-in-one drills are designed to prepare the implant bed precisely. The size of the drills is adjusted to the length and diameter of the corresponding fixture. The profile of the two-in-one drills is designed to collect and conserve the vital bone.

IMPLANT BODY DRIVERS

The inner shaping of the Ø 3,8- 4,3-4,8-5,3 mm DBL implants are identical, so the drivers can be equally used for these fixtures.
The implant body drivers are available in two lengths:

TAPS

The tap drills are to be used for tapping hard, dense bone. The tap drills are designed with a thread having the same configuration as the implant. There is no tap drill for screw implants with thread height 1,25 mm as they are designed for soft bone where there is no tap drilling is needed.